Sectional doors SECTIOLITE® Security

August 13, 2020 10:41 am Published by
Sold By: Butzbach GmbH Industrietore

Categories:

Description

For highly senitive areas, the Sectional doors SECTIOLITE® Security can be equipped with the “Security” option for an increased burglar resistance.

With this option, the Sectional doors SECTIOLITE® Security is one of the few doors on the market to achieve the resistance class WK3.

Benefits

  • Increased burglar resistance.
  • Meets safety requirements resistance class 3 according to DIN V ENV 1627 : 1999.

Highly versatile

Thanks to its unique design, the SECTIOLITE sectional door has no springs, protruding hinges or spiral cables. Compared to conventional sectional doors, maintenance costs and downtimes are reduced to a minimum.

The solid guide tracks made of thick-walled aluminium are closed on three sides for providing maximum safety. The cover strips can be removed for maintenance purposes.

In the standard version, the Sectional doors SECTIOLITE® runs parallel to the ceiling construction via a 90-degree deflection. Alternatively, we also offer the SECTIOLITE sectional door as a vertical lifting door or as rails guided along the roof. In this way we can adapt the opening principle of your SECTIOLITE door to your assembly situation.

 Your advantages

  • Extremely long lifetime due to a sustainable material selection and conception
  • No cost-intensive wear parts such as springs, spiral cables, etc.
  • Above-average wind load resistance
  • High light transmission due to the fibreglass door infill
  • High opening speed up to 1 m/s
  • The safety edge control stops automatically and reverses the door when it hits an obstacle

Our performances

More cost-effectiveness

The reliable SECTIOLITE direct operates without wearing parts such as tension or torsion springs – this minimizes maintenance and costs. Thanks to the effective door sealing and high light transmission, you will also save energy on heating and lighting. THe result is the perfect sot to benefit ratio.

Greater flexibility

The Butzbach SECTIOLITE sectional doors are extremely flexible in their installation options, including a low lintel fitting (lintel requirement min. 350mm), a guide track extension, a roof sequence fitting (rails guided along the ceiling following the roof pitch) and a vertical version (vertical door).

Better safety

The SECTIOLITE’s trilaterally closed aluminium tracks ensure a high degree of safety by avoiding the risk of crushing and injuries. Thanks to their high corrosion resistance, the doors can also be used in environments with extreme conditions. The design of the ‘sectional door with fibreglass door leaves is highly impact and shock resistant.

 

Technical Data

Type ST40 ST40T (with pass door) ST40S (variant “S”)
Width min. – max. 1.000 – 6.000 mm 2.500 – 5.500 mm 1.000 – 6.000 mm
Height min. – max. 2.100 – 5.000 mm 2.800 – 5.000 mm 2.000 – 5.000 mm
Leaf weight max. 450 kg 450 kg 450 kg
Single door panel height ca. 500 mm 500 mm 250 mm
Fibreglass door panel thickness 40 mm 40 mm 40 mm
Lintel requirement min. 800 / 350 mm 800 / 400 mm 800 / 350 mm
Opening speed up to 1 m/s 0,6 m/s 1,5 m/s
Certified sound insulation Rw up to 23 dB 24 dB 24 dB
Possible thermal insulation Ud 2,7 W/m²K 2,9 W/m²K 3,5 W/m²K
Resistance to wind load (width-dependent) class 2-5 class 2-3 class 2-5
Air permeability class 4 class 3 class 4
Resistance to water penetration class 3 class 3 class 3
Protection against burglary WK3 x
Vision panel x x x
Oval window x
Wet room option x x x / —
Fibreglass cover as lintel facing x x x / —
Swivwlling lateral element with or without door on request on request on request
Fix part with or without door in door look x x x
Laterally movable guide track on request on request on request
Combination with high-speed doors x x x / —

Possible x

Not possible  —

 

Click here to learn more!

 

 

 

Categorised in:

This post was written by Francisco Ortuno

Comments are closed here.