Description
MT ConsMa anti-slip mat for tracked vehicles such as construction vehicles and tanks
Features:
- Dimensions (L x W x H): approx. 1,200 x 800 x 24 mm
- Compressive strength: approx. 7.50 N/mm2* (equivalent to 750 t/m2).
- In accordance with the requirements of VDI guideline 2700 ff., tested as a floor covering with used
excavator chain links only, co-efficient of friction values* as follows:- DRY in running direction of chain: μ = 0.64
- DRY across running direction of chain: μ = 0.62
- WET in running direction of chain: μ = 0.51
- WET across running direction of chain: μ = 0.40
- Made from PU-bonded rubber granulate
- Long life, developed especially for tracked and construction vehicles
- In continuous testing with construction machines up to 85 t in weight, the product required
replacement after three years - Combination of excellent adhesion and high load bearing capacity
Benefits:
- Long durability, polyurethane
- Short loading times mean cost savings
- Replaces costly anti-slip floor coatings with longer downtime of the transport vehicles.
- It can be cut to size over large areas or before installation and easily glued to truck wooden
- Floors, phenolic resin screen printing plates, steel or aluminium floors.
- Low wear with high slip resistance
- Suitable as a permanent RHM replacement
- Despite the high coefficients of sliding friction, the rolling resistance of a lift truck or forklift truck on MT “Secure” is no higher than on a screen-printed floor.
Dimmensions
Dimensions (L x W x H)
1,200 x 800 x 24 mm
Comments are closed here.