UVD ROBOTS®Model B

Description

UVD ROBOTS®Model B disinfection robot was developed for disinfection at hospitals, including operating theatres, patient rooms, corridors, and larger areas as long as the distance and disinfection time are enough to reach all the targeted areas. UVD ROBOTS®Model B disinfection robot has been designed to disinfect large areas as airports, warehouses, etc. Model B has been independently tested and proven to be highly effective in reducing numbers of harmfull pathogens.

UV-C LIGHT

Our UVD Robot® disinfects small and large areas simply just by driving by. Depending on the exposure time, The UVD Robot can kill up to 99,99% of pathogens such as MRSA, C. dif, and CPR/CRA. It disinfects all environments that are potentially harbouring dangerous microorganisms.

The UV-C light is highly effective against most types of bacteria and viruses, and when used correctly, can be also gentle to surfaces.

AUTONOMOUS

The germicidal characteristics of UV-C light at close range are well known. However, the laws of physics create obstacles that challenge the feasibility of using UV-C light as a disinfectant in larger areas: Shadow & Distance.

The unavoidable challenges of using UV-C disinfection governed by the laws of physics create the necessity for repositioning a manual UV-C device multiple times.

Only with the autonomous UVD Robots® can you be sure to have irradiated sufficient UV-C amounts on to all surfaces within a given area.

SAFETY

The robots sensors will detect if someone enters a room under a disinfection, and immediately stop the disinfection.

The safety system will be triggered if the operator drives the robot manually too close to a wall, person, or other object above 15 cm. If this occurs, the robot’s front and rear sensors will trigger the robot to stop before hitting the object.

EASE OF USE

The robot is operated by following the easy step-by-step guide.

The autonomous drive system allows operators to easily call the robot via its tablet and send it to the desired location while the initial cleaning is taking place.

After the cleaning has been conducted, the robot is sent in. Once the disinfection has been activated, and the tablet placed on the door, the operator can continue their planned work elsewhere until it is finished. After the disinfection, the robot signals via the tablet that the disinfection is finished. The robot is now ready to disinfect a new room.

POWER

The UVD Robot® is powered by Li-MNC batteries that gives you the power to disinfect larger areas such as airports, supermarkets, conference rooms and several patient rooms.

It comes with a docking station, which the UVD Robot finds by it self, when it needs recharging. To make sure that it is fully charged and ready for its next disinfection, time saving as it requires no involvement from the operator.