Description
Banding system US-2000 TRS-SLM (aligned stacks for single or triple use)
Can be connected directly to saddle stitchers or adhesive binders
The US-2000 TRS-SLM can be directly connected to a saddlestitcher or adhesive binder with a stacker and transfers the product stack (1- to 3 benefit) at full speed capacity.
You receive a perfectly aligned product stack thanks to the alignment on all sides of the stack and the soft or hard stack compression before banding. By banding with adjustable tension your printed products are bundled without any damage to the edges.
US-2000 TRS-SLM-A
The US-2000 TRS-SLM-A takes over the product stack (1-to 3 benefit) out of the stacker onto the shuttle worth conveyor. Side guide plates go into the stacker and the retracted flaps insure that the stack is removed from it. The servo-handling system pushes the stack into the banding machine. The inflow control is quick and easy due to the adjustable side guide plates.
Options
- ABC-dispenser
- 3 benefits with 3 guides
- Warning sensor for banding material usage
- printer position control for printed banding material
- Single or double press
Technical Data
- Performance – up to 24 bandings per minute
- Band width – 20, 30, 50 mm
- Voltage – 230 V, 13 A
- Electrical power -Depending on the model
- Weight -Depending on the model
- Dimension – Depending on the model
- Arch sizes (WxH) – 360 x 260 mm (others upon request)
Click here to learn more!
Comments are closed here.